Valve Push Rod Tool.

That makes putting the rocker box back onto the head and locating all 4 push rods so easy.

Suitable for BSA: A10 - A7.

Rocker Base Nut Spanner.

Suitable for your Triumph.
It is used for 12 point nuts. (Nut not included)

On the odd occasion, you may need to grind the edge of the spanner, so you get clearance.

Clutch Hub Extracting Tool.

Suitable for Triumph Twins:

All Models Unit upto 1987. Pre-Unit upto 1962.

Clutch Locking Tool / Plate.

Suitable for Triumph Twins:

All Models Unit upto 1987. Pre-Unit upto 1962.

Contact Breaker Auto Advanced Unit Extractor Tool.

Suitable for Triumph:

Unit Twins with points in side.

Fork Top Nut Spanner.

Approx size of openings: 37mm / 1.5 inch.

Suitable for Triumph: Unit upto 1978. Pre-Unit upto 1962.

Rocker Spindle Oil Seal Compressor.

When fitting a new rocker o-ring, using this tool stops the o-ring being cut in half when fitted into the rocker box. Suitable for Triumph Twins:

Unit 350 - 500, 1957 to 1974.

Rocker Spindle Oil Seal Compressor.

When fitting a new rocker o-ring, using this tool stops the o-ring being cut in half when fitted into the rocker box. Suitable for Triumph Twins:

Unit 650 - 750, 1963 to 1987. Pre-Unit upto 1962.

Tappet Guide Block Fitting and Removal Tool.

Suitable for Triumph Twins:

All Models Unit upto 1987. Pre-Unit upto 1962.

Points Oil Seal Fitting Tool.

This tool is used when replacing the timing cover so that it expands the points oil seal (70-4568) over the exhaust camshaft. It has a cycle thread (CEI) with 26 tpi.

Suitable for Triumph Unit Twins: 350, 500, 650, 1963 to 1970.

Valve Guide Fitting and Removal Tool.

Diameter of drift is 5/16", so will fit other models.

Suitable for Triumph Twins: All Models Unit upto 1987. Pre-Unit upto 1962.